4
4
1
Introduction
1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws attention to an exceptionally great, imminent danger to your health or life due to hazardous
voltages.
!
Danger!
Draws attention to a danger with high risk which, if not avoided, may result in death or serious injury.
!
Warning!
Draws attention to a danger with medium risk which, if not avoided, may result in death or serious injury.
!
Caution!
Draws attention to a danger with low risk which, if not avoided, may result in minor or moderate injury.
!
Attention!
Draws attention to potential risks of property damage or loss of quality.
i
Note!
Advices to make work routine easier or on important steps to be carried out.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
Time
Information in the display.
1.2
Intended Use
•
The device has been designed for operations with SQUIX series printers, being an option for labeling cylindric
items of diameters 2 mm to 16 mm, such as single wires, strands, cables, hoses, tubes or round rods. Any other
use has not been intended. The manufacturer / supplier is not liable for damages resulting from misuse. Risks are
entirely up to operators.
•
Intended use also includes observing this manual.
•
The device has been manufactured state of the art according to accepted safety regulations. Nevertheless,
operation may pose risks to the life and limb of operators or third parties, or result in limitations to the device and
other material assets.
•
The device must be used only in a technically perfect condition, in accordance with its intended use, conscious of
safety and dangers and in compliance with the instructions included in this manual.
!
Attention!
Operating the applicator requires printer firmware 5.41.1, or any later release.
i
Note!
All the current documentation are provided on the Internet.