8
8
2
Installation
2.1
Preparing the Printer
2.1.1
Removing the Front Cover
1
2
Loosen screw (2) and remove the front cover (1).
Figure 3 Removing the front cover
2.1.2
Replacing Peel-off Plate and Print Roller
2
1
Loosen screw (1) by a few turns.
Remove the standard peel-off plate (2)
Unlock printhead.
Unscrew the roller bearing (7) from the bearing plate
(6) using a 2.5 mm Allen key.
Pull the standard print roller (8) off the shaft (3) and
through the bearing plate (6).
Clean the shaft (3).
Set a narrow-rubbered print roller (5) onto the shaft
(3) and turn the roller slightly until the hexagon of the
shaft connects with the internal hexagon of the print
roller.
Set the roller bearing (7) onto the roller pin and
screw in the bearing plate (6).
Attach the WICON peel-off plate (4) to screw (1) and
pins (9).
Tighten the screw (1).
8
7
5
3
6
4
9
1
9
Figure 4
Replacing peel-off plate and print roller
