13
5.7
Adjustment the Cut Length
i
Notice!
The adjusted cut length must be orientated on the separated PCB. Then, the display "mileage" for the cut
length shown a realistic value.
1
2
Cut length
P1
P2
Cut direction
Fig. 6
Limit cutting length
1. Press P1 (1) until the blade carriage has moved to position P1.
2. Press P2 (2) until the blade carriage has moved to position P2.
The cutting length results from the distance between the front edge of the carriage (in the cutting direction) in the
position P1 and the trailing edge of the carriage (in the cutting direction) in the position P2.
5.8
Reset the counters
2
3
4
5
1
Fig. 7
Display section counter
Display
(2) select count cunt (number of cuts) or
(4) mileage (cut length).
Press the button
(3) for approx. 3 seconds to reset the display (5) to zero.
Display speed (1) lights for the duration of the counter reset.
5 Startup
Содержание MAESTRO 6
Страница 1: ...Operator s Manual MAESTRO 6 PCB Searator ...
