4
1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger to your health or life.
!
Warning!
Indicates a hazardous situation that could lead to injuries or material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of quality.
i
Notice!
Gives you tips. They make a working sequence easier or draw attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
1.2
Intended Use
•
The device is manufactured in accordance with the current technological status and the recognized safety rules.
However, danger to the life and limb of the user or third parties and/or damage to the device and other tangible
assets can arise during use.
•
The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the operating manual.
•
The device is intended exclusively for separating pre-scored PCB's. Any other use or use going beyond this shall
be regarded as improper use. The manufacturer/supplier shall not be liable for damage resulting from unautho-
rized use; the user shall bear the risk alone.
•
Usage for the intended purpose also includes complying with the operating manual, including the manufacturer‘s
maintenance recommendations and specifications.
i
Notice!
The complete documentation can also currently be found in the Internet.
1.3
Safety Instructions
•
The device is configured for
voltages of 115 or 230 V AC. It only has to be plugged into a grounded socket.
•
Hazard by electrical charge. Provide an earthing connection via press stud.
•
Only connect the device to other devices which have a protective low voltage.
•
Switch off all affected devices (e.g. conveyor belt) before connecting or disconnecting.
•
Risk of hand injury. Wear protective gloves while PCB separating.
•
Ensure that people‘s clothing, hair, jewelry etc. do not come into contact with the exposed rotating blade.
•
In an emergency situation, actuate the emergency stop switch in the control panel by tight pressing. This inter-
rupts the voltage supply to the device.
•
The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).
•
Do not use the device in an explosive atmosphere.
•
Do not use the device close to high-voltage power lines.
•
Work going beyond this may only be performed by trained personnel or service technicians.
1
Introduction
Содержание MAESTRO 6
Страница 1: ...Operator s Manual MAESTRO 6 PCB Searator ...
