CAB Apollo 4 страница 20 Скачать руководство пользователя

Страница: 20 / 118

cab - Produkttechnik GmbH / Tharo Systems, Inc.

2 General Safety Instructions

- The printers of the

Apollo 4

series are built exclusively to print labels and

tags, continuous paper, etc. Do not use other materials than listed in

Chapter 1.

- Connect the printer only to an outlet with the correct voltage !

The printer is configured for either 230V or 115V power supply, which can

be switched using the input voltage selector at the back of the printer.

Connect only to a power outlet with a

grounded

contact.

- The printer must only be connected to devices which have extra low

voltage.

- Power must be OFF before plugging in any accessory or connecting the

printer to a computer, etc. Also switch power off on all appliances before

disconnecting.

- Do not expose the printer to any moisture, or use in damp or wet areas.

- The printer will operate with the cover open if necessary. This is not

recommended, as moving or rotating parts become accessible. Keep long

hair, jewelry, loose clothes away from the moving parts.

- During the print process the printhead will become hot. Use extra caution

when touching the printhead.

3 Unpacking and Delivery Contents

Inspect the

Apollo's

packaging and contents immediately after receipt for

possible damage caused by shipping.

The supplied equipment of the

Apollo 4

depends on the requested options.

Compare the delivered accessories with your order.

Please keep the original packaging in case the printer must be returned.

Содержание Apollo 4























































































































Результаты поиска

Содержание Apollo 4

Отзывы:

Похожие инструкции для Apollo 4

Бренды по названию

Популярные бренды

CAB Apollo 4, Руководство оператора

Результаты поиска

Содержание Apollo 4

Отзывы:

Похожие инструкции для Apollo 4

Бренды по названию

Популярные бренды