CAB Apollo 4, Руководство оператора

Страница: 105 / 118

C-5 cab - Produkttechnik GmbH / Tharo Systems, Inc.
Error message
No label found *
No label size
No record found
Out of paper *
Out of ribbon *
Solution
Press key repeatedly until
printer recognizes the next label on
the material.
Cancel current print job.
Change the label format set in the
software. Restart print job.
Cancel current print job.
Change either software setting or
print media. Restart print job.
Check programming.
Check programming and card
contents
Insert new supply roll
Check paper feed.
Load new supply roll of transfer
ribbon.
Cancel the current print job.
Change the heat level via software,
clean the printhead , load transfer
ribbon, restart print job.
Cancel current print job.
Set software to direct thermal mode.
Restart print job.
Jam tight the supply roll of transfer
ribbon by turning the knurled knob at
the supply hub.
Possible cause
There are labels missing on the
label material
The label format as set in the
software does not correspond with
the real label format
Printer is loaded with continuous
paper but the software is set on
labels
Definition of the label size is
missing at the label description
Refers to the optional memory
card; database access error
Out of label material
Label has not properly been loaded
in the label sensor fittings
Out of transfer ribbon
Ribbon melted during printing
The printer is loaded with thermal
labels for direct thermal mode
(without transfer ribbon); but the
software is set for transfer printing.
The supply roll of transfer ribbon is
not jammed tight at the supply hub.
Table C-3 Error messages (continuation)