CAB a3-2, Руководство оператора

Страница: 128 / 138

E-6 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
1
2
3
3
4
5
6
7a
7c
8
7b
9
Appendix E - Replacing Assembly Units
Replacing the Print Roller and the Rewind Assist Roller
NOTICE !
There is described the replacement of the print roller and the rewind
assist roller for the P-version printer types in this chapter.
The replacement of the print roller at the other printer types can be made
in the same way !
Fig. E-6 Changing Print Roller and Rewind Assist Roller (I)
1. Lift the printhead up and swing the locking system ( 5 ) away from the
rewind assist roller ( 4 ). Remove the media from the printer.
2. Take the Allen key ( 8 ), loosen the screws ( 3 ) and remove the dispense
plate ( 2 ).
3. Remove the three screws ( 7 ).
4. Remove the plate ( 9 ) and the printhead support ( 6 ) from the axle of the
print roller ( 1 ) and the rewind assist roller ( 4 ).
WARNING !
Unplug the power cord from the power source before starting!