CAB a3-2, Руководство оператора

Страница: 54 / 138

54 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
1
2
4
3
5
Fig. 7m Adjustment of the Transfer Ribbon
In the event that wrinkles appear in the transfer ribbon ( 1 ), which cause an
inconsistent print image, the transfer ribbon shield ( 2 ) can be adjusted to
remove the wrinkles. The adjustment should be done during the printing
process.
1. The current position is visible on the scale ( 3 ).
2. To change the position, rotate the screw ( 4 ) using the Allen key ( 5 ).
Rotating it in the direction of "+" will tighten the transfer ribbon the inner
edge of the transfer ribbon. Rotating it in the direction of "-" will tighten the
outer edge of the tranfer ribbon.
To eliminate the wrinkles, tighten the side where the wrinkles are
originating.
Adjustment of the Transfer Ribbon
7. Media Loading