CAB a3-2, Руководство оператора

Страница: 43 / 138

43 cab Produkttechnik GmbH & Co KG
A3-2 / A3 / A4 / A6
Preparation for Tear-Off Mode / Rewind Mode
The R-version printers are delivered with the rewind guide plate ( 1 ) mounted
for operation in rewind mode. With the optional tear-off plate the printer also
may be operated in tear-off mode. For this purpose the rewind guide plate ( 1 )
must be replaced by the tear-off plate ( 3 ).
The P-version printers are prepared for the dispense mode. After mounting the
optional tear-off or rewind guide plate the printers also may be operated in tear-
off or rewind mode.
7. Media Loading
Fig. 7b Exchange Rewind Guide Plate / Tear-Off Plate
The exchange of the different plates can be made in a similar way as the
exchange rewind guide plate / tear-off plate :
1. Open the cover.
2. Loosen the two screws (
2 ).
3. Slide the rewind guide plate ( 1 ) to the right as far as possible to remove the
plate from the printer.
4. Place the slotted holes on the tear-off plate ( 3 ) over the screws ( 2 ) on the
front of the printer and slide the plate to the left until it stops.
5. Tighten the two screws ( 2 ).
2
2
3
1