4
4
6
Service Functions
6.4
Save Settings
Access only possible with memory medium in the default card slot!
With the
Save settings
function the printer configuration can be saved to a memory medium (memory card, USB
flash drive, Internal Flash File System) in the default card slot. The configuration will be saved as XML file in the
folder \MISC of the CF card. The current date is used as file name YYYYMMDD.XML (e.g. 20070427.XML for a file
saved on 04-27-2007).
Insert memory medium.
Press the
menu
button.
Select
Service > Save settings
menu.
If the function
Save settings
is protected via a PIN, use the buttons
~
,
,
|
and
}
to enter the code number
and confirm with the
button.
Saving of the configuration data starts.
OK
is shown in the display when the entire saving procedure is complete.
Press the
button.
Do not remove the memory medium until the saving procedure is complete.
An error message appearing during the saving procedure may be caused by an unreadable medium (e.g. unknown
card type, unformatted card)
“9.3" on page 47.
6.5
Load Settings
Access only possible with memory medium in the default card slot!
A printer configuration previously saved to a memory medium (memory card, USB flash drive, Internal Flash File
System) can be loaded with the
Load settings
function.
Insert memory medium.
Press the
menu
button.
Select
Service > Load settings
menu.
If the function
Load settings
is protected via a PIN, use the buttons
~
,
,
|
and
}
to enter the code number
and confirm with the
button.
If several configuration files are found on the memory medium, select the desired file with the
~
and
buttons.
Press the
button.
Loading of the configuration data starts. Do not remove the memory card until the loading procedure is complete.
OK
is shown in the display when the entire loading procedure is complete.
Press the
button.
If an error occurs during the loading procedure, an error message appears in the display. Restart the loading
procedure in this case. If an error occurs again, the configuration parameters must be entered via the operating
panel.
6.6
Changing OEM Name
Access only when service key is inserted!
The device designation cam be changed with the
OEM Name
function.
Insert service key into a USB master interface.
Press the
menu
button.
Select
Service > OEM Name
menu.
Press the
button.
A list of available names is shown in the display.
Use the
~
and
buttons to select the desired OEM name.
Press the
button.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
Содержание A2+
Страница 1: ...Configuration Manual cab Label Printers...
