10
11
3.4
Pivoting the Applicator
1
4
3
2
5
Fig. 6
Pivoting the applicator
!
Attention!
Danger of injury to hands and fingers by the applicator!
When releasing the snap lock keeping the applicator in place, it will drop due to its own weight.
1. To dismount the applicator (1), for cleaning or inserting material, pull the locking bolts (4) outward.
2. With pulled out locking bots (4) lift the applicator (1) until the bolts can snap into the provided holes (5) of the
mounting plate (3).
3. To remount the applicator pull the locking bolts (4) outward again and push the applicator toward the printer until
the bolts (4) can securely lock into the provided holes (2) on the mounting plate (3).
