17
5.4
Mounting and Demounting the Cover
To initialize the applicator or perform adjustments it is required to remove the cover. Once content with the changes reattach
the cover.
!
Warning!
It is only permitted to use the applicator with a mounted cover (2).
Only in the case of servicing, adjustments and maintenance may the cover be removed.
2
3
1
1. Loosen the screw (3).
2. Lift off the cover upward (2).
3. Once the service or maintenance has been
completed lower the cover over the cylinder.
4. Guide cylinder (1) through the hole in the
cover (2).
5.
Tighten the screw (3) to fix the cover (2) in
place.
Fig. 9
Cover
5.5
Cleaning
!
Attention!
Never use solvent or abrasive.
1
Clean the outside surfaces with multi purpose cleaner.
Remove dust particles and leftover label pieces with a soft
brush and/or vacuum cleaner.
The slide foil (1) requires regular cleaning as the most dirt
is deposited here.
Fig. 10
Cleaning of the pad