Applicator - PLC Interface
A-5
cab - Produkttechnik GmbH & Co KG
PIN5 - XEDG
- No existing print job
State message.
There is no print job currently available.
In this state the contact between PIN5 and PIN14 is opened.
PIN6 - XSAA
- General error message
General error message of both, printer and applicator.
This message is shown when one of the two errors either XDNB or
XETF occurs.
This signal is important in case that only one error
signal of the applicator can be analysed from the system control.
In this state the contact between PIN6 and PIN14 is opened.
PIN7 - XSOE
- Pad in starting position
The signal is active when the pad is in the starting position where it
picks up the label from the printer.
In this state the contact between PIN7 and PIN14 is opened.
PIN8 - GND
- Grounding (0V)
PIN9 - XSTRTR
- Reverse line of the start signal XSTRT
PIN10 - XSTPR
- Reverse line of the stop signal XSTP
PIN11 - XDREER
- Reverse line of the print first label signal XDREE
PIN12 - XSUE
- Pad in labelling position
The signal is active when the pad is in its labelling position where the
label is removed from the vacuum plate and positioned onto the
product.
In this state the contact between PIN12 and PIN14 is opened.
