Blow Applicator with Swing Cylinder
cab - Produkttechnik GmbH & Co KG
21
If the label is removed from the pad manually after the first half cycle
of the labelling process, the print process will be repeated when the
pre-dispense key is pressed again.
If there is no print job, only the movements of the pad as described for
the second part of the labelling cycle are carried out, pressing the key.
The first half cycle of the labelling process can also be released by
pressing the
key on the control panel of the printer. In that case,
a blank label is picked up by the pad. That way, the whole labelling
process can be simulated by alternately pressing the
key and the
pre-dispense key without the need of a print job or a connection to a
computer.
