FA00946M4A - 11/2017
FA00946M4A - 11/2017
Description
Control card for managing, via radio, maximum 10, RIO
wireless accessories.
It connects to automation control boards or control panels,
fi tted with the corresponding connector or slot.
Main components
①
Antenna
②
Programming button
③
Radio power selector dBm (L=5 / H=10)
④
RESET button
⑤
Alert LED
⑥
Card slot
Technical data
Type
RIOCN8WS
Current draw (mA)
25 max.
* Radio range over clear areas (m)
30 max.
Frequency (MHz)
868.95
Transmission power (dBm)
10 max.
*
Do not place the RIOCN8WS card behind walls, metal
fences or any other obstructions that could interfere with
radio communications.
Installing
⚠
Before CUTTING OFF THE MAINS POWER SUPPLY, dis-
connect any batteries fi tted on the device.
- Fit the RIOCN8WS into the automation's control board
.
NB: Do not change the antenna's position.
- Power up the automation and check that the WIRELESS
LEDs are fl ashing.
- If they are not fl ashing, RESET the card (see the corre-
sponding procedure).
- Remove the batteries from the accessories.
- Save each and every component of the system (see acces-
sories instructions).
- Make the required functional checks (see the correspond-
ing procedure).
RESETTING procedure
Keep the RESET button pressed for 10 seconds, until the
WIRELESS LEDs start fl ashing.
N.B.: If you replace any device on the system, you will
have to RESET and then again SAVE all of the system
devices.
