HDMI OUT HDMI signal output port. Connect to HDMI display devices
with HDMI cable.
Connect to the IR blaster cable, the IR signal is from IR
IN port of the Transmitter.
6 / 8
DC 24V
DC 24V/1A power input port.
Note that the extender supports POC function, it means that either
Transmitter or Receiver is connected to 24V/1A power supply, the other
doesn’t need power supply.
HDBT IN
RJ45 connector for connecting the HDBT OUT port of
Transmitter with CAT6/6a cable.
SERVICE Firmware update port.
Function Description
Name
No.
▪ Illuminating: Transmitter
and Receiver are in good connection
status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
3
4
5
6
IR IN
Connect to the IR receiver cable. The IR signal will send
to the IR OUT port of the Transmitter.
IR OUT
Data Signal
Indicator
(Orange)
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
8
9
10
11
Link Signal
Indicator
(Green)
SPDIF IN
Optical fiber audio signal input port.
RS-232
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through between the
Transmitter and Receiver.
12
