1. Control box
2. Main stem
3. Hand grip
4. Armrest/detector stand
5. Lower stem
6. Twistlock stem adjuster
7. Search-head
8. Search-head retaining screw, washers, nut
9. Search-head lead
10. Loudspeaker
11. Headphone socket (rear of control box)
12. Battery compartment
13. Battery compartment cover
14. On/off/sensitivity control
15. Retune push-button
16. Variable discrimination control.
naming of the parts
12
13
The CS440XD is a lightweight professional format metal detector.
A variable discrimination control (16) can be adjusted so that the detector does
not react to some types of metal which are likely to be worthless. The CS440XD is
extremely easy to use but you will be better at using your detector if you take the
time to read this manual carefully and understand what the controls are doing.
CS440XD - Rapid get you going instructions
Assemble and adjust
for length. Twist surplus lead around the stem.
Insert battery so that the terminals line up easily with the contacts in the battery
compartment. (9volt MN1604 )
Switch on and rotate Sensitivity Control
(14) to the start of the green section on the scale.
Rotate the Discrimination Control
(16) to the green position on the scale.
Press the Retune button
(15) once.
Start searching
using a relaxed motion swinging the search-head from side to side as close
to the ground as possible.
Press the Retune button
(15) every few minutes or whenever the background tone rises to
an unacceptable level.
You are now searching in minimal discrimination mode.
The presence of a metal target
will be indicated by the increasing intensity of the tone. Signals from small ferrous rubbish
will be ignored.
C.Scope CS440XD Metal Detector
14
16
15
1
3
4
5
6
7
8
9
2
10
11
CS440MXD_Manual.indd 2
CS440MXD_Manual.indd 2
23/01/2009 10:24
23/01/2009 10:24
