10
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Dimensions
See diagrams opposite.
Weight
0.10kg
Supply Voltage
/- 10%, /- 10%
Frequency
50/60Hz
Circuit protection
10A
Dimming output
Basic insulation only. Although low voltage,
this is not an SELV output and should be
treated as if mains potential. Use mains
rated wiring.
Maximum Switching Load
2 Amps fluorescent and incandescent
lighting.
2 Amps compact fluorescent lighting.
2 Amps low energy lighting.
2 Amps low voltage lighting (switch primary
of transformer).
Switch SON lighting loads via a contactor.
Number of ballasts
Up to 4 dimming ballasts.
Power consumption
PRM
On 307mW, Off 228mW
DD
On 357mW, Off 228mW
AD
On 344mW, Off 268mW
Cable specification
1m, silicon insulation and sheath.
PRM
3 x 0.75mm
2
AD & DD 3 x 0.75mm
2
& 2 x 0.50mm
2
Temperature
-10ºC to 50ºC
Humidity
5 to 95% non-condensing
Material
Flame retardant ABS/PC
Type
Class 2
IP rating
IP40
Compliance
EMC-2004/108/EC
LVD-2006/95/EC
Technical data
Part numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
Ref: #WD676 Issue 2
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
Part number
Description
Detectors
EBMINT-AD
Integrated PIR detector AD 1-10V
EBMINT-DD
Integrated PIR detector DD DALI/DSI
EBMINT-PRM
Integrated PIR detector PRM
Accessories
UHS5
Programming IR handset
UNLCDHS
Universal LCD IR handset
UK patent GB2498572 and international patents applied for
.
