12 / 24
Position the internal structure starting from the perforated panel for housing the skimmer and proceed
clockwise, positioning the first corner pillar (art. Code 4030027) between the short and long sides. In
each change of direction an angular pillar will be inserted, a very rigid element with a triangular section.
The coupling is performed by means of M10x30 bolts.
Pay particular attention to the unions to be made with the ribs as specified below.
WARNING
The panels that form the internal corner of the pool must be tied to the omega beams 500 mm long,
previously positioned in the four corners with 45 ° inclination. It is necessary to couple these panels and
the omega by means of n. 2 bolts M10x30.
In correspondence with the short side where the technical compartment of the swimming pool will be
located, it will be necessary to install n. 4 ribs coupling them directly to the internal profiles of the
corner pillars. The ribs have different sizes
06/12/2019
Ver.00
MEDITERRANEA
