4 | C-ITRONE 200/300
2 TRANSPORT AND INSTALLATION
2.1 General Unit Check
2.2 Technical Data
2.3 Transport / Storage
The unit should only be stored at a temper-ature
range from -25°C (-13°F) to +55°C (+131°F)
Damage to the unit can be caused by incor-rect
transport, set-up, or deconstruction.
Unit should always be set and secured on level,
solid ground. The unit must always be operated
in closed rooms, in a safe and controlled
environment.
2.4 Set-up/Start-up
Damage to the unit can be caused by in-correct
transport, set-up, or deconstruc-tion.
2.5 Electrical Plug/ Electrical Fuses
The electrical fuses for this unit are locat-ed directly below
the 3-prong power plug on the unit casing. Be aware that
re-placement of worn out fuses may be nec-essary. In this
case, only use 2A replace-ment fuses, which can be found
at almost any local electrical parts store. One (1) 2A equals
one (1) fuse.
2.6 Suction Hose Attachment
The suction hose is attached to the unit through an easy
''click-system''. Simply push the front ring back, attach the
suction hose to the unit, and pull the front ring for-ward
again, insuring that the hose is sitting tight in the correct
position..
Unit
Has been placed
securely and on solid
ground
Electrical plug
Is free of damages
Vacuum hose and
suction cup
Is free of damages
Pressure
Regulator
Function check
Unit Type
C 200
C 300
Measurement
(l x w x h)
40 x 50 x 26 cm
40 x 50 x 26 cm
Weight
10 kg (22lbs)
10 kg (22lbs)
Energy
Voltage
Frequency
2 A
230 Volt
50 Hz
2 A
230 Volt
50 Hz
Rated Currency
2 A
2 A
Rated Capacity
460 W
460 W
