Wiser Home Controller Installation Instructions
25
1. On the main Wireless section, enable or disable wireless. Select a
network mode. If you enabled wireless, go to Step 2.
Network Mode:
B/G Mixed
Wireless-B Only
Wireless-G Only
Wireless-BGN
Wireless-N Only
2. Provide a Network Name. The default SSID is
WiserHomeControl
.
3. Select radio band (standard: 20 MHz or wide: 40 MHz).
4. Select a channel. Select a channel that does not conflict with other
local wireless devices.
Channel
1 - 2.412 GHz
2 - 2.417 GHz
3 - 2.422 GHz
4 - 2.427 GHz
5 - 2.432 GHz
6 - 2.437 GHz
7 - 2.442 GHz
8 - 2.447 GHz
9 - 2.452 GHz
10 - 2.457 GHz
11 - 2.462 GHz
12 - 2.467 GHz
13 - 2.472 GHz
Note:
Check for compliance with local and country
regulations.
5. Click the Wireless Security tab to view the wireless security page.
Clipsal recommends using
WPA-PSK
.
