This device has been designed to operate with an approved antenna listed on
page 11, and having a maximum gain of 5.1 dBi. Antennas not included in this
list or having a gain greater than 5.1 dBi are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (EIRP)
is not more than that required for successful
communication.
FCC Approval (USA) - Refer To Page 34 for FCC Requirements.
IC Approval (Canada) - Refer To Page 35.
Contains FCC ID: ZTL-RFSC1 & IC: 9794A-RFSC1
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
- 4 -
