CFG_
PROFILE_TYPE
24
Value that selects what profile specific device
type is recognized by the remote device.
(
READ ONLY
– Write attempts are ignored)
INTERVAL–TYPE DEVICE = 1
-- Primarily governed by a timer. When it is
time to deliver data, the wireless device
transmits the data to the gateway.
TRIGGER–TYPE DEVICE = 2
-- Primarily governed by the occurrence of an
event. If an event is detect OR the
CFG_INTERVAL_STANDARD is reached, then
the wireless device transmits the data to the
gateway.
CFG_INT_TYPE_
MEAS_PER_RPT
25
Device-Type Specific Parameter:
INTERVAL–TYPE DEVICE
Measurements Per Report represents the
number of measurements that will be taken for
every given wireless report. If an exception is
noted, then the device will immediately report
instead of waiting for the report interval. Value
of 1 – 250 permissible. Minimum granularity of
1 sec maximum sample rate.
CFG_INT_TYPE_
HYSTERESIS_H
26
Device-Type Specific Parameter:
INTERVAL–TYPE DEVICE
Hysteresis represents the amount of observed
variance must occur to permit a device that has
registered an exception to remove the
exception notification.
CFG_INT_TYPE_
HYSTERESIS_L
27
CFG_INT_TYPE_
THRESH_MIN_H
28
Device-Type Specific Parameter:
INTERVAL–TYPE DEVICE
Minimum Threshold represents the amount of
device specific observed signal can be reduced
before an exception is registered and reported.
CFG_INT_TYPE_
THRESH_MIN_L
29
CFG_INT_TYPE_
THRESH_MAX_H
30
Device-Type Specific Parameter:
INTERVAL–TYPE DEVICE
Maximum Threshold represents the amount of
device specific observed signal can be
increased before an exception is registered
and reported.
CFG_INT_TYPE_
THRESH_MAX_L
31
- 32 -
