BYD F6, Руководство пользователя

Страница: 207 / 215

F6 OWNER’S MANUAL
204
Emergent towing
If your vehicle needs to be towed, call a
professional towing service or an
organization. Never tow your vehicle with
just a rope or chain. It is very dangerous.
There are three ways to tow your vehicle.
1
．
Flat-bed Equipment
— The operator
loads your vehicle on the back of a truck.
This is the best way to transport your BYD
vehicle.
2
．
Wheel-lift Equipment
— The tow
truckuses two pivoting arms that go under
the tires (front or rear) and lift them off the
ground. The other two tires remain on the
ground. This is an acceptable way to tow
your BYD vehicle.
Notice
If your BYD vehicle can not use
Flat-bed Equipment to transport, you
should use Wheel-lift Equipment to
transport. If, due to damage, your
vehicle must be towed with the front
wheels on the ground, do the following:
Manual transmission:
1 Release the parking brake.
2 put the transmission in Neutral.
3 Leave the ignition switch in the
ACCESSOPY( ) position, so the
Ⅰ
steering wheel does not lock.
Automatic transmission:
1 Release the parking brake.
2 Start the engine.
3 Shift to Drive, then to Neutral.
4 turn off the engine.
5 Leave the ignition switch in the
ACCESSOPY( ) position, so the
Ⅰ
steering wheel does not lock.
3 ． If you can not find trailer company while
occurring emergency faults, you can use
towing hook to tow the vehicle. There is a
decoration cover on the humper under the
right front headlight. Remove the cover, and
take out the towing hook from vehicle tools
and screw into the towing hook bracket and
tightening it, use the special trailer cable.
You must be careful while towing the
vehicle.
The driver must sit in the towed vehicle,
operate the vehicle and the brakes
Towing hook bracket