BYD F0 Скачать руководство пользователя страница 25

Страница: 25 / 139

BYD AUTO

F0 Owner’s Manua

Friendly Tips

Seat belts can provide the

maximum protection in collision

accidents if the driver and passengers

sit straight and lean on the seat

backs. If you lean on the seat back

obliquely, the seat belt part for the

waist may slide over your hip and

directly exerts pressure on your belly.

In front-collision accidents, over

obliquity of the seat may increase the

risk of human injuries.

Pull the right and left sides of the rear seat

back simultaneously backward. The left and

right unlocking belts will unlock the seat

back and fold it downward. The trunk will

be expanded to the backs of the front seats.

For considerations of baggage loading, refer

“

Considerations of baggage loading

”

in Section 2.

Head protection device

For safety and comfort, the seats are

equipped with head protection devices

Seat belts

Consideration for use of seat belts:

BYD strongly require that the driver and

passenger in the vehicle wear seat belts at

any time to reduce the possibility of injuries

in accidents.

Seat belts equipped on the vehicle are

designed for adults and should be applied to

children with caution.

Friendly Tips

When returning the seat back to the

upright position, to prevent human

injuries in accidents or emergency

braking, the following preventive

measures should be taken:

Pull and push the seat back to make

sure it is firmly locked up.

Make sure the seat belt is not bent or

caught by the seat back and arrange it

in the correct position.

Head Protection

Device

Rear seats

Integrated fixed rear seat

Integrated foldable rear seat

（

Optional

）

Содержание F0












































































































































Результаты поиска

Содержание F0

Отзывы:

Похожие инструкции для F0

Бренды по названию

Популярные бренды

BYD F0, Руководство пользователя

Результаты поиска

Содержание F0

Отзывы:

Похожие инструкции для F0

Бренды по названию

Популярные бренды