BYD F0 Скачать руководство пользователя страница 114

Страница: 114 / 139

BYD AUTO

F0 Owner’s Manua

111

Friendly Tips

To reduce the possibility of personal
injury, please obey the instructions
below when you try to lift the car by
jack.

Try to avoid breathing in the

exhaust gas from the engine, because
the exhaust gas contains carbon
monoxide, which is colorless and
smellless. It will cause serious injury.

No part of your body is allowed

to stay under the car lifted by jack, or
there may be bodily injury.

When the car is lifted by jack,

please do not start or operate the
engine.

Park your car on the firm and

flat ground and make sure the parking
brake is pulled up. If necessary, please
block the tire opposite to the lifting
point.

Make sure the jack is placed on

the right lifting point. To lift the car by
a jack not placed properly may
damage the car or make the car drop
down from the jack and thus cause

injuries.

When the car is supported

completely by jack, no one is allowed
to stay under the car. Please use car
support stand to hold it.

When someone is in the car,

please do not lift it.

Do not put any materials on the

top or bottom of the jack while lifting.

Notice

Make sure the jack is stored

properly, or it may damage the car.

Содержание F0












































































































































Результаты поиска

Содержание F0

Отзывы:

Похожие инструкции для F0

Бренды по названию

Популярные бренды

BYD F0, Руководство пользователя

Результаты поиска

Содержание F0

Отзывы:

Похожие инструкции для F0

Бренды по названию

Популярные бренды