BYD F0, Руководство пользователя

Страница: 81 / 139

BYD AUTO F0 Owner’s Manua
l
78
(a) Examinations before starting the
engine
Vehicle exterior
1. Tires
:
Determine the tire pressure
with a tire pressure gauge and check
them carefully to see whether there is
any cut, damage or over wear.
2. Wheel bolts
:
Make sure the bolts are
not loose or lost.
3. Leakage: After the vehicle has been
parked for a while, check whether
there is any fuel, engine oil, water or
other liquid leakage on the ground.
(It
’
s normal that there are water
drops produced by the air
conditioning system.)
4.
Lighting: Make sure head lights,
parking lights, small lights, turn signal
lights and other lighting devices can
all work normally. Check the light
intensity of the head lights.
Vehicle interior
1.
Spare tire, jack and wheel bolt
wrench
:
Check the tire pressure and
make sure the vehicle is provided with
a jack and a wheel bolt wrench
.
2. Seat belt : Check whether the buckle
can be fastened firm. Make sure the
seat belt is not worn or scraped.
3. Instruments and controllers
:
Specifically, make sure the
maintenance indicators, instrument
lighting and defrosters can work
normally.
4. Brake: Make sure there is enough free
clearance for the pedal.
Engine compartment interior
1. Spare fuses : Make sure spare fuses of
different rated amperage are provided
in the fuse box.
2. Coolant level : Make sure the coolant
level is correct. (refer to instructions
in Section 7-2)
3. Battery and cable : Check whether
the battery connectors are corroded or
loose, whether the box has cracks and
whether the cables are well connected.
4. Wires: Check whether there are
broken, loosened or disconnected
wires.
5. Fuel pipe: Check whether the
pipeline has leakage or loose
connection.
(b) After the engine is started
Exhaust system
:
Check whether there is
gas leakage by listening. If any, repair the
exhaust system immediately. (Refer to
“
Engine exhaust warning
”
in Section 2)
Engine oil level: Stop the engine and park
the vehicle on the flat ground. After a few
minutes, determine the engine oil level with
an oil measuring meter. (Refer to instruction
in Section 7-2)
(c) In driving
Instruments:
Make sure the maintenance
indicators and the speedometer work
normally.
Brake: Check the brake in a safe place and
make sure it doesn
’
t deflect to any
direction in braking.
Examination of other abnormalities:
Check to see whether there are loose parts
and leakage; listen to see whether there are
abnormal noises.