BYAN SYSTEMS, INC.
Automated Gate and Access Control Products
413 Linden • Lusk, WY 82225 • (800) 223-2926
4
C.
The operator is intended for installation only on gates used for vehicles. Pedestrians must be
supplied with a separate access opening.
D.
The gate must be installed in a location so that enough clearance is supplied between the gate
and adjacent structures when opening and closing to reduce the risk of entrapment.
E.
Controls must be far enough from the gate so that the user is prevented from coming in
contract with the gate while operating the controls. Controls intended to be used to reset the
operator after two sequential activations of the entrapment protection device or devices must
be located in the line-of-sight of the gate. Outdoor or easily accessible controls shall have a
security feature to prevent unauthorized use.
F.
End User Safety:
•
The gate automation and access control manufacturer has no control over the gate
system you have automated. The word “system” herein refers to the gatepost, gate
leaf, hinging, all automation equipment, accessory devices, the construction and
installation thereof.
•
Vehicular gate operating systems provide convenience and security to their users.
Because these machines produce such high levels of force, all gate system designers,
installers and end users must be aware of the potential hazards associated with
improperly designed, installed or maintained systems.
•
Each component must work in unison to provide the end user, visitors, and
subsequent owners with proper operation of all automation, safety and access control
equipment.
•
It is the responsibility of the designer, installer, and purchaser, to ensure the total
system is safe for the particular application.
•
The end users’ responsibility is always present. Assurance of safety rests with the
user of the gate system.
•
Gate systems should be protected as may be necessary from children and pets by
whatever means necessary. Moving devices always present people, pets, and
property with certain risks and have potential for harm.
•
The following list of precautions has been prepared for you review. This list is no
all–inclusive nor is it represented as such. Please ask your installer any questions you
have now or later about the installation, operation, or safety features of your gate
system.
1.
Be sure the operating and safety instructions are available to all persons that will
operate the gate system.
Содержание HYD 1000
