Byan Systems HYD 1000, Инструкция по установке и техническое руководство

Страница: 30 / 36

BYAN SYSTEMS, INC.
Automated Gate and Access Control Products
413 Linden • Lusk, WY 82225 • (800) 223-2926
27
DIP Switch Operation Mode Selection
No OPTION ON OFF
1 Reversing Stroke Function (Operator will close for 1 second) ACTIVE INACTIVE
2 Step-by-step function* ACTIVE INACTIVE
3 Automatic Closing Function ACTIVE INACTIVE
4 Reversing Button is not operative during opening ACTIVE INACTIVE
5 Closing order by cars safety contact ACTIVE INACTIVE
6 See note below REF JP1 ------------- --------------
7 Cars safety contact is operative during opening ACTIVE INACTIVE
*Step-by-step: Each activation of the reverse button will stop the gate before changing direction.
Note: There is a jumper JP1 (below the remote control card connector) that changes the
selectable option no. 6 in the following manner:
JP1 Open:
No. 6
ON In the power on state, unit will do a closing function
.
OFF In the power on state, unit will do an opening function.
JP1 Closed:
In the power on state, the door remains paused. In this case the switch No. 6 controls the
function of the traffic lights.
No. 6 ON The traffic lights card will act as a flashing light card (upper relay) and a garage
light card (lower relay).
OFF The traffic lights card will act as green and red lights.
Selectable Options Switch S3
No OPTION ON OFF
1 Extends Run Time Opening and Closing Time
(30 Seconds to 1 Minute) Opening and Closing Time
(3-30 Seconds)
2 Repositioning the Door * ACTIVE INACTIVE
* With this option active and the door closed, the door is closed for 2 seconds every hour, and if
the door is opened the door is opened for 2 seconds every hour.