Byan Systems HYD 1000, Инструкция по установке и техническое руководство

Страница: 2 / 36

BYAN SYSTEMS, INC.
Automated Gate and Access Control Products
413 Linden • Lusk, WY 82225 • (800) 223-2926
1. inherent entrapment sensor;
2. built in “warn before/while adjustable operate” system;
3. built in time to close;
4. max. operating timers for opening and closing;
5. programmable operating mode options;
6. anti-tailgate mode;
7. built-in power surge/lightening strike protection.
C. Transformer: energy efficient 30VA adjustable for 120 VAC or 240 VAC operation.
D. Control circuit: 24 VAC
E. External sensor provisions for photo eyes or gate edges or a combination thereof to be installed
such that the gate is capable of reversing in either direction upon sensing an obstruction.
F. Optional control devices: card reader, key-switch, radio control, push buttons, vehicle detectors, or
keypads.
G. Optional alert devices: flashing lights or rotating beacon.
5. Slide gate operator shall be Byan Systems, Inc. model # HYD-1000.
A. Gate operator Factory Testing:
1. Fully assemble and test, at the factory, each gate operator to ensure smooth operation,
sequencing and electrical connection integrity.
2. Check all mechanical connections for tightness and alignment. Check all welds for
completeness and continuity. Check welded corners and edges to assure they are square
and straight.
3. Inspect finish for completeness. Touch up any imperfections prior to shipment.
4. Check all hydraulic hoses and electrical wires to assure that chafing cannot occur.