11
Electronic Locking System
Simultaneously press Top Left button (S1.4) and Top Middle button (S1.5) for 3
seconds until the lock in the display will show a closed lock. Now the serving buttons
are electronically locked and protected against unauthorized operation.
To re-activate: press again simultaneously the Top Left button (S1.4) and the Top
Middle button (S1.5) until the lock in the display will disappears.
Bottom three keys
• Left button (S1.1): Tapping of "tasting glass" bottle left
• Middle button (S1.2): Tapping of "half glass" bottle left
• Right button (S1.3): Tapping of "full glass" bottle left
Keypad Right
Top three keys
Left button (S2.4): Enter key (arrow): Rinse / confirm button
• one tap will give very small amount of wine (to throw away)
• once a long press (flush mode) provides continuous wine or water until the button
is released.
Programming the temperature in the cabinet
Simultaneously press the
+
and
-
key until "program" appears in the display
Middle button (-): Temperature down (S2.5): Display shows the set temperature.
• With a single press (or hold) the temperature goes down
Bottom three keys
Right button (+): Temperature up (S2.6): Display shows the set temperature.
• With a single press (or hold) the temperature goes up
• Left button (S2.1): Tapping of "tasting glass" right bottle
• Middle button (S2.2): Tapping of "half glass" right bottle
• Right button (S2.3): Tapping of "full glass" right bottle
Programming pouring quantities:
• Press key S1.1 and S1.2 simultaneously (respectively 2.1 and 2.2) until "program"
appears in the display
• The text "program" will be displayed with the letter L for left and R for the right
bottle
• Program now per key (S1.1, S1.2 and S1.3, respectively. S2.1, S2.2 and S2.3) the
precise desired amount of wine. You can do this in as many steps as you want (we
recommend the use of a measuring glass or, even more precisely, a scale in order to
weigh the quantity by weight).
• When satisfied, press key S1.6 or S2.4 to confirm and store. The units are now set
and programmed.
Tip: The units can either be programmed per each key individually or all at once. The
desired amount of wine per key can be done in 1 to (maximum) 3 steps. Each time
the Enter key (S1.6 and S2.4) is pressed, you exit the program mode and changes
