BWT Infinity M, Инструкция по установке и эксплуатации, Страница: 17 / 28

17 17
EN
1.4 Transport and installation
To avoid damage during transport to the installation
location, do not remove the BWT product from the
packaging until you have reached the relevant loca-
tion. Then dispose of the packaging in the correct
manner. Check that the delivery is complete.
If there is a risk of frost, drain all components that
convey water.
Lift or transport the product or its components only
from the designated suspension eyes or attachment
points, if present.
The product must be installed or mounted on a suf-
ficiently strong and level horizontal surface and must
be adequately secured against falling or tipping.
1.5 Symbols used
This symbol indicates general
risks to persons, units or the
environment.
This symbol indicates that the
product can be recycled after it
is shut down.
This symbol indicates informa-
tion or instructions that you must
observe in order to ensure safe
operation.
1.6 How safety instructions are
displayed
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed.
Safety instructions are displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard (e.g. risk of fatal injury)!
► Escape or prevent hazard
► Rescue measure (optional)
Signal word / colour Indicates the severity
of the hazard
Warning symbol
Calls attention to the
hazard
Source / type of
hazard
Indicates the type
and the source of the
hazard
Consequences of
hazard
Explains the conse -
quences of not follow-
ing the safety instruc-
tions
Hazard prevention
measure
Explains how to avoid
the hazard