PROTECTION & SAFETY
55
2020/06 - Indice de révision : A - Code : 34560
The following are excluded from the scope of the guarantee covering the prefabricated pit wall:
Damage resulting from the use of water treatment systems and/ or products incompatible with the materials
used to manufacture the components comprising the pit wall, or occasioned by the use of said systems or
products other than in compliance with the instructions provided by the manufacturer of the systems and
products. The user’s attention is specifically drawn to the risks of corrosion of some metallic components of the
pit wall associated when salt is present in the pool water, whether or not in combination with the use of a salt
electrolysis system.
Mechanical damage (deformation, breakage) of the pit wall attributable to significant stress loading exerted by
bathers on the separating pit wall.
Damage resulting from the use of the automatic cover other than in accordance with this manual.
4.
Guarantee on pool fittings
Pool fittings (throughwall flanges, bearing sealing units, sub-coping support plates, etc.) equipping BWT covers
are covered by a 10 year guarantee, with the exception of the parts ensuring leaktightness at the point where
the motor shaft passes through which are covered by a 2 year guarantee, concerning their structural integrity
over time. These guarantees are subject to the condition that the fittings were installed in accordance with the
technical recommendation set out in the BWT cover engineering diagrams and that they are used in accordance
with the instructions set out in this manual.
The following are excluded from the scope of the guarantee covering pool fittings:
Damage to the gaskets of the mechanical seal caused by inserting the motor shaft with the protective pin.
Failure to respect assembly instructions (alignment, etc.) indicated in the engineering diagrams.
5.
Other elements not previously mentioned
The elements or sub-assemblies not mentioned in the previous guarantee clauses, and belonging to the
nomenclature of BWT covers, are covered by a 2 year guarantee.
The following are excluded from the scope of the guarantee covering such elements and sub-
assemblies:
Damage occasioned by installation, use or maintenance other than as described in the BWT cover engineering
diagrams and this manual.
Damage consecutive to unusual weather events (storms, hail, tornados, flooding, etc.).
Damage caused by the use of water treatment systems or products incompatible with the materials comprising
these elements and sub-assemblies or to the use or operation of said systems and products other than as
recommended by their manufacturer.
Damage attributable to water parameters (pH, TH, TAC, metals, etc.) that do not comply with the
recommendations set out in this manual.
6.
Application of guarantees
The various guarantees extended to BWT covers by Procopi BWT Groupe are limited to the replacement or
repair of some or all of the equipment recognised as defective.
The following shall under no circumstances be included in the scope of said guarantees:
- The cost of installing and/ or removing all or part of an automatic cover,
