28/48
2019/01 - Indice de révision : A - Code : 97160421
WOODEN POOLS
BWT
myPOOL
HOTLINE
Figure 42 – Union under the skimmer
Figure 43 – Rigid descening pipe
Next, screw the upper union of the rigid descending pipes, C, onto the 2 return fitting elbows.
Wrap teflon around the 2 threadings on the J unions and screw them into position underneath the
skimmer.
Screw the compression union heads into position under the skimmers. Cut the pipes at the mark
corresponding to the height of your pool. Chamfer the cut slightly to facilitate insertion of the pipe into the
compression union.
Figure 44 –
Rigid descending pipe under the return fitting (Odyssea model)
Check that the tube is inserted fully then tighten the green barrel union taking care to ensure that the
connection is leaktight.
Screw the rigid descending fittings C onto the return fitting nozzle elbows. Do not forget to check that the
o-ring is in position.
Cut the rigid descending pipe under the vacuum fitting, (as indicated above and depending on pool height)
and install it
