background image

GasAlertMicroClip

Introduction

1

GasAlertMicroClip

Introduction

The operator’s manual provides basic information for the 
GasAlertMicroClip XT, XL and X3. For complete operating 
instructions, refer to the 

GasAlertMicroClip Technical Reference 

Guide

 provided on the CD-ROM. The GasAlertMicroClip (“the 

detector”) warns of hazardous gas at levels above user-defined 
alarm setpoints. The detector is a personal safety device. It is 
your responsibility to respond properly to the alarm.

Note

The detector is shipped with English as the default 
displayed language. Additional languages provided are 
Portuguese, Spanish, German, and French. The screens 
for the additional languages are displayed on the detector 
and in the corresponding operator’s manuals.

What’s In a Box

Detector
Calibration Cap
Battery Charging Adapter
Documentation Kit

Zeroing the Sensors

To zero the sensors, refer to steps #1-3 in Calibration on page 7.

ec

 

Warning

This instrument contains a lithium polymer battery. 
Dispose of lithium cells immediately. Do not disassemble 
and do not dispose of in fire. Do not mix with the solid 
waste stream. Spent batteries should be disposed of by a 
qualified recycler or hazardous materials handler.

ec

 Avertissement

Cet appareil contient une batterie au lithium polymère. 
Mettez immédiatement au rebut les piles au lithium 
usagées. Veillez à ne jamais les démonter ou les jeter au 
feu. Ne les mélangez pas aux autres déchets solides. Les 
piles usagées doivent être éliminées par un centre de 
recyclage agréé ou par un centre de traitement de matières 
dangereuses.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание microclip x3



























Отзывы: