Butterfly B1201B, Руководство пользователя

Страница: 40 / 87

P a g e | 40
Butterfly B1201B/T - Single Head 12 Needle Embroidery Machine Manual
Glossary
Glossary
‐ Backing – Foundation used to stabilize and keep garment flat. Most backings are paper like.
‐ Bobbin – Thread used to tie a knot under the embroidery garment which holds down the
upper thread
‐ Bobbin Case – Holds the bobbin
‐ Check Springs – Spring used in threading track which removes whiplash during embroidery
‐ Consumables – Consumables are parts used on the machine such as hooks, needles, and
bobbin cases, etc that are to be replaced on a regular basis of normal operation.
‐ Digitized(ing) – Digitizing (in embroidery) is the act of converting a logo, design, symbol, etc
into an embroidery file readable by embroidery machines and software. A digitized design
is one that has all stitches, color changes, trims, etc programmed in so that the embroidery
machine.
‐ Hook – Part which ties thread onto the bobbin and makes the embroidery stitch
‐ Non ‐ consumables –Non ‐ consumables are parts that are not designed to be replaced on a
general basis such as motors, shafts, etc.
‐ Pantograph – Device on machine that moves hoop in the X and Y direction (left, right, up
and down)
‐ Polyester – Type of textile. In embroidery machines, its typically a stronger thread type
than Rayon
‐ Pre ‐ digitized – A design that has already been digitized.
‐ Rayon ‐ Type of textile. In embroidery machines, its typically a stronger thread type than
Polyester
‐ Solvy – A plastic like sheet sometimes used on top of embroidery very similar to cellophane.
Used to add more foundation on the embroidery. Typically dissolves under water.
‐ Stabilizer – See Backing
‐ Tensions – In embroidery, typically refers to how tight the thread feels when pulling it
through a threaded machine or through the threaded bobbin. Improper tension will cause
both false and actual thread breaks, and poor final embroidery quality among many other
problems.
‐ Threading Rod – Used to thread embroidery thread through the embroidery tubes.
‐ Topping – Used on the top of a garment such as solvy.
‐ Tubular Arms – Arms that attach to the pantograph. The tubular hoops then attach to these
arms
‐ Tubular Hoop/Frame – A special type of hoop consisting of a plastic ring and another plastic
piece that goes into this ring. This hoop has a metal clip which speeds up the process of
loading the hoop into the machine.
‐ Upper Thread Break – Typically refers to the current spool of thread that is embroidering,
has broke.
‐ Wash ‐ a ‐ Way – See Solvy