Butterfly B1201B, Руководство пользователя

Страница: 32 / 87

P a g e | 32
Butterfly B1201B/T - Single Head 12 Needle Embroidery Machine Manual
※
If you want to enter a different directory of the USB stick, press “ ” and “ ” to select
the directory you want and then press “ ” key to confirm. To go back a directory select “..”, and
press the “ ” key.
4. The system with then show the prompt: “Input PAT NO.”, and show the next available pattern
number in memory, press “ ” key to use this pattern number.
※
If you don’t want to use this pattern number, you can use the 10 keypad to input a new
pattern number. You can press “ ” key to delete the current number. Once done, press “ ”
key to confirm.
5. The system with then show the prompt: “Compensate the stitches?” Then press “ ” and “ ”
key to select “ Yes ” or “ No ” and press “ ” key to confirm.
※
If select the flat ‐ equalized stitches, it will prompt that input the equalized value.
6. Input the pattern in disk to system memory, then it will prompt: “Continue?” , select “yes” to
continue input pattern and select “No” or press “ ” key to exit this operation.
Load design from memory (internal memory)
Once the design is loaded off the USB stick (see previous tutorial) and on the Butterflys internal
memory, then it can be loaded to embroider.
1. In the preparation mode ( ) press “ ” key. The following screen will display: