Butterfly B1201B, Руководство пользователя

Страница: 39 / 87

P a g e | 39
Butterfly B1201B/T - Single Head 12 Needle Embroidery Machine Manual
Do not place more than one drop per needle bar per 8 hour shift. It is recommended to remove the
bobbin case when oiling and run a few trims without the bobbin in the case to circulate the oil. If you
embroidery machine start to make a constant clicking sound it is usually due to a lack of oil on the hook.
C) – Upper Head Assembly (Reciprocator Shaft) ‐ Once
every (16 ‐ 32) Hours of embroidery. The Reciprocator
shaft is what the reciprocator rides up and down on.
The shaft is not easily accessible directly from the
front of the machine so, you must access it from the
sides through troughs on the head. To access these
troughs, either move the head all the way to needle
number 1 or to needle number 12. If you are on
needle number 1, the trough will be accessible from
the right side of the head. If you are needle number
12, the trough will be accessible from the left of the
head. A couple drops should fill the trough. Move the head to the opposite and place a couple more
drops on that opposite side.
D) – Oil Stickers – As indicated on the sticker. There
are several oiling stickers/holes noted on the machine.
These oiling points should be oil as often and as much
as noted on the stickers.
Oil Point Breakdown
A) – One drop once every (20) Hours of embroidery
B) – One Drop once every (4) Hours of embroidery
C) – One to two drops on each size once every (16 ‐ 32) Hours of embroidery
D) – As indicated on sticker