GB
Page 22 of 68
INSTRUCTION, USE AND
MAINTENANCE MANUAL
4. Fit the protection cap (
Fig. 28 ref. 1
) in the locknut
(
Fig. 28 ref. 2
) and fasten against the wheel.
Fig. 28
Some aluminium wheels, with very high centring, must
be fitted with the cone outside the wheel.
5. Clean the mandrel (
Fig. 29 ref. 1
) before fitting
the wheel.
6. Fit the wheel (
Fig. 29 ref. 3
) with the inside of the
rim towards the wheel balancer, until the wheel is
up against the support flange (
Fig. 29 ref. 2
).
1
2
3
Fig. 29
7. Fit the cone (
Fig. 30 ref. 3
) with the narrowest part
turned towards the wheel.
8. Fit the grip-ring (
Fig. 30 ref. 1
) in the nut (
Fig. 30
ref. 2
) and fasten the cone (
Fig. 30 ref. 3
).
Fig. 30
THE GRIP-RING (FIG. 30 REF. 1)
MUST BE MOUNTED WITH THE
TEETH SIDE TOWARDS THE
RLOCKING RING NUT (FIG. 30
REF. 2).
1297-M008-4_B
LIBRAK355 - LIBRAK355P - LIBRAK355S - LIBRAK355PS - LIBRAK355WS - LIBRAK355PWS
