background image

ENGLISH

9

3 Warranty

In accordance with the enclosed warranty conditions, a guaran-
tee is provided for the boat and any equipment that has been 
installed in the boatyard. For post-production installations con-
cerning the engine, trim tabs, compass, possible navigation 
equipment and other devices, the manufacturer of the equipment 
in question is directly responsible for any warranty concerns. For 
the various equipment/devices, separate warranty cards together 
with contact information for their suppliers are enclosed. For other 
matters of warranty we request that you contact the Buster dealer 
indicated on the cover of this handbook.

4 Before 

launching

4.1 Registration

In many countries, it is mandatory for even small boats to be 
registered. Check with the local authorities in your country of resi-
dence for the statutory regulations concerning boat registration. 
A minimum age and possibly a separate boating licence is nor-
mally required for driving a registered boat 

4.2 Insurance

Boat insurance may compensate for damage which has occurred 
on the water, during transportation or dry docking. Check sepa-
rately the insurer’s liability regarding hoisting the boat. Insurance 
can also indirectly affect safety on the water, because in the event 
of serious injuries it allows the essential focus to be on saving 
lives. Insurance companies will provide more detailed information 
on various insurance alternatives.

Содержание X















































Отзывы: