manualshive.com logo in svg

BUSKRO BK7IB-2, Руководство пользователя

Поделиться
Скачать
BUSKRO BK7IB-2 Скачать руководство пользователя страница 8

Chapter 1

 General 

Information 

Page 1-3 

  

1.2.3  BK1600 Series Conveyor Compatibility 

The BK7IB-2 is fully compatible with any BK1600 series conveyor model.  Connection to 

the conveyor is made through a 7-pin round connector located at the rear of the base.  A 

DC-speed controller mounted inside the base comes with a speed potentiometer, located 

on the front panel, for complete control of the conveyor's belt speed.  A second 

potentiometer allows the operator to set the increased speed required during “stack” 

operation. 

1.2.4  Tabber Compatibility 

The inkjet base is compatible with all Buskro Tabbers.  This allows for full integration 

between the Tabber and base controls such that the controls on either system can directly 

stop and/or start the entire system.  Connection to the Tabber is made through a connector 

located at the rear of the base.  The Tabber may be operated either upstream or 

downstream from the BK7IB-2. 

1.2.5  Auxiliary Feeder Compatibility 

The inkjet base is equipped with a 14-pin connector for control of a BK720 feeder.  The 

feeder may be installed using an optional flip-up table, which is attached to the base, or 

using a separate stand.  Its start/stop operation can be controlled from the base. 

A BK425 feeder may also be used and would be connected to the upstream control 

connector of the BK7IB-2.   

Buskro Ltd. 

 

BK7IB Inline Base 

Содержание BK7IB-2


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды