BUSKRO BK7IB-2 Скачать руководство пользователя страница 19

Страница: 19 / 97

Chapter 2

Operator

Instructions

Page 2-6

2.3 Upstream Compatibility

The BK7IB-2 was designed to be a part of a flexible system in which one or more units

can precede or follow it in the process stream. Possible units, which may be placed

upstream from the printing base, would be a feeder (e.g. a BK425) or a tabber (BK730).

The required communication with an upstream device is carried out over the BK7IB-2’s

upstream connector (JB8, at the rear of the machine).

The functions found on this connector are: Start and Stop signals from the BK7IB-2 to the

upstream device and Start and Stop signals from the upstream device to the BK7IB-2. The

UPSTREAM connector of the BK7IB-2 is configured to communicate with the

DOWNSTREAM connector of the upstream unit.

A separate 14-pin connector (

JB3

, on the rear of the machine) is provided for a BK720

Friction Feeder.

To be able to stop and start the system from any location (Emergency Stop), the Stop and

Start functions are linked to the next unit via connections on the Upstream and

Downstream connectors of the BK7IB-2.

2.3.1 BK720 Friction Feeder

The BK720 Friction Feeder differs from other equipment in a system configuration since

it is a “table-top” unit, rather than the normal floor-standing units.

To accommodate this feeder, the BK7IB-2 can be equipped with an optional flip-up table.

This table has the right height and dimensions to match the BK720 to the BK7IB-2 base.

The BK720 Feeder has been designed to work with the BK7IB-2. Although the feeder

can function as a stand-alone unit with its own ON/OFF switch and speed control

potentiometer, its operating mode can be switched so that the Run function is under the

control of the BK7IB-2. An interface cable with the appropriate connectors is provided to

connect the BK720 to connector JB3 at the back of the BK7IB-2.

Buskro Ltd.

BK7IB Inline Base

Содержание BK7IB-2


































































































Результаты поиска

Содержание BK7IB-2

Отзывы:

Похожие инструкции для BK7IB-2

Бренды по названию

Популярные бренды

BUSKRO BK7IB-2, Руководство пользователя

Результаты поиска

Содержание BK7IB-2

Отзывы:

Похожие инструкции для BK7IB-2

Бренды по названию

Популярные бренды