Replacing the Cutting Blade
With the engine switched off, and the cutting
disc stationary and the sparkplug disconnected,
open the cutter housing door and remove the
two cutting blades. The blades are double sided
so in the first instance can be rotated and
refitted. Take the blades to your authorised
service dealer to resharpen the blades if both sides are worn.
Cleaning and Storage
If you wish to clean the machine, wait for the engine to cool down and hose the machine down
inside and out. Ensure that the drainage hole at the bottom of the cutter housing is not blocked.
Do not wash the chipper with high pressure water blasters.
9
