10. Use the machine only in daylight hours or in good artificial light.
11. Always point the outlet nozzle in a safe direction.
12. Always wear suitable eye protection and ear muffs when operating the Chipper.
13. Only operate the Chipper when it is on a level surface.
14. Never attempt to move the Chipper while the engine and cutting disc are running.
15. Keep hands and feet well clear of rotating blades and components.
16. Always stop the engine when you leave the Chipper unattended.
17. Always stop the engine and disconnect the spark plug before attempting to clean the Chipper,
un-block the cutting mechanisms, carry out maintenance or repairs, inspecting the Chipper after
abnormal vibrations or after striking a foreign object.
18. Never operate the Chipper with defective guards, shields or without safety protection devices in
place and in good working order.
19. Do not use this machine for anything other than its intended purpose. Do not modify the design
of the machine in any way. If you have any doubts, contact your authorised service dealer.
HEALTH & SAFETY AT WORK:
This Chipper has been designed and constructed so that, in so far as reasonably practical, it will not
endanger the safety and health of those working with it. This is however subject to the machine
being properly used and maintained according to the conditions stated in this manual and
elsewhere, which have been found necessary as a result of the research and testing of the Supplier.
Assembly Instructions
On receiving your Bushranger BRC65 Chipper, the Inlet
Chute will need to be attached.
1. Remove the machine from its packaging.
2. Remove the bolts from the machine where the inlet
chute will be attached.
3. Hang the Inlet Chute on the rear of the Chipper and attach using the two M10x25 nuts and bolts
(provided). Tighten the bolts with two spanners.
4. Fill the engine with oil. Use high quality 10W30 oil. Refer to the supplied engine operation manual
for the quantity of oil needed to fill the engine and other regular maintenance procedures relating to
the engine.
4