7
Limit the hours of operation. Try to fill each day
with jobs where operating the brush cutter or
other hand-held power equipment is not required.
If you experience discomfort, redness and
swelling of the fingers followed by whitening and
loss of feeling, consult your physician before
further exposing yourself to cold and vibration.
• Always wear ear protection. Loud noise for
long time can make hearing debase even lost
hearing. Total face and head protection must
be worn to prevent damage from fallon or
branch.
• Wear non-slip heavy duty work gloves to
improve your grip on the brush cutter handle.
Gloves also reduce the transmission of
machine vibration to your hands.
• WARNING:
The cutter area is still dangerous
while the machine is coasting to a stop.
DESCRIPTION
Safety Manual
included with unit.
Read before operating and keep for future
reference to learn proper, safe operating
techniques.
Drive Shaft Assembly -
Contains a
specially designed liner and a flexible drive shaft.
D-Handle -
This handle can be adjusted at your
convenience for comfort.
Ignition Switch -
“slide switch” mounted on top
of the Throttle Trigger Housing. Move switch
FORWARD to Stop, BACK to Run.
Safety Lever -
Must be compressed before the
throttle trigger is used to accelerate the engine.
Throttle Trigger -
Spring loaded to return to idle
when released. When accelerating, squeeze
trigger gradually for best operating technique. Do
not hold the trigger while starting.
Air Cleaner Cover -
Contains replaceable foam
element.
Fuel Tank -
Contains fuel and fuel filter.
Purge Bulb -
Pushing purge bulb (5 to 7 times
before starting),will remove all air and stale
fuel from fuel system and bring fresh fuel to the
carburetor.
Choke -
the choke control is located on the side
of the filter cover.
Cold Starts -
Pull lever up to
close choke for cold starts, push lever down for
RUN position.
Throttle Control
Safety Lever
On/Off Switch
‘D’ Handle
Bent Shaft
Trimmer Head
Safety Guard
Throttle Trigger
Fuel Tank
Fuel Tank Guard
Muffler
Starter
Содержание B2600
Страница 1: ...1 BENT SHAFT TRIMMER B2600 OPERATOR S MANUAL ...
Страница 15: ...15 IPL BENT SHAFT TRIMMER ...
Страница 17: ...17 IPL BENT SHAFT TRIMMER ENGINE ...
Страница 19: ...19 NOTES ...