5
SAFETY RULES AND PRECAUTIONS
Proper safety precautions must be observed. Like
all power equipment this unit must be handled
carefully.
DO NOT EXPOSE YOURSELF OR
OTHERS TO DANGER
. Follow these general
rules. Do not permit others to use this machine
unless they are thoroughly responsible and have
read, and understand the machine manual and
are trained in its operation.
• Always wear safety goggles for eye protection.
Dress properly, do not wear loose clothing
or jewelry that could become caught in
moving parts of the unit. Safe, sturdy, nonskid
footwear should always be worn. Long hair
should be tied back. It is recommended that
legs and feet be covered to protect from flying
debris during operation.
• Inspect the entire machine for loose parts
(nuts, bolts, screws, etc.) and any damage.
Repair or replace as necessary before using
the machine.
• DO NOT USE
any attachment with this power
head other than the ones recommended by
our company. Serious injury to the operator or
bystanders could result as well as damage to
the machine.
• Keep the handles free from oil and fuel.
• Always use proper handles and shoulder strap
when cutting.
• Do not smoke while mixing fuel or filling tank.
• Do not mix fuel in an enclosed room or near
open flames. Assure adequate ventilation.
• Always mix and store the fuel in a properly
marked container that is approved by local
codes and ordinances for such usage.
• Never remove the fuel tank cap while the
engine is still running.
• Never start or run the engine inside a closed
room or building. Fumes from the exhaust
contain dangerous carbon monoxide.
• Never attempt to make engine adjustments
while the unit is running and strapped to the
operator. Always make engine adjustments
with the unit resting on a flat, clear surface.
• Do not use the unit if it is damaged or poorly
adjusted. Never remove the machine’s guard.
Serious injury to the operator or bystanders
could result as well as damage to the
machine.
• Inspect the area to be cut and remove all
debris that could become entangled in the
nylon cutting head. Also remove any objects
that the unit may throw during cutting.
• Keep children away. Onlookers should be kept
at a safe distance from the work area, at least
15 METRES (50 FEET).
• Never leave the machine unattended.
• Do not use this unit for any job other than
those for which it is intended as described in
this manual.
• Do not overreach. Keep proper footing and
balance at all times. Do not run the unit while
standing on a ladder or on any other unstable
footing location.
• Keep hands and feet clear of the nylon cutting
head while the unit is in use.
• Do not use this type of machine for sweeping
away debris.
• Do not use the unit when you are tired, ill or
under the influence of medication, drugs or
alcohol.
• Use nylon cutting head which is free of
damage. If a stone or any other obstacle is hit,
stop the engine and check the nylon cutting
head. A broken or unbalanced nylon cutting
head must never be used.
• Follow instructions for changing accessories.
Содержание B2600
Страница 1: ...1 BENT SHAFT TRIMMER B2600 OPERATOR S MANUAL ...
Страница 15: ...15 IPL BENT SHAFT TRIMMER ...
Страница 17: ...17 IPL BENT SHAFT TRIMMER ENGINE ...
Страница 19: ...19 NOTES ...