background image

Set Up

Before using the appliance, it is important to prepare the appliance by installing 

the proper adaptors to suit our intended use. In this example, we will be preparing 

the portable water heater to be used with a hose input from a 12-volt pump.

1. 

Remove the heater along with all the 

components from the box and place 

them on a table. Notice that there is a 

gas input, hot water output, cold water 

input as well as a battery box.

5. 

Fit and tighten the hose fitting with a 

spanner, taking care not to over tighten 

as this could break or crack the inlet 

pipe. The ‘gas input’ is now ready to be 

connected to the gas regulator hose.

7. 

Tighten the hose, taking care not 

to over tighten as this could break or 

crack the inlet pipe.

10. 

Attach the shower rose to the 

flexible shower hose using the conical 

end fitting. Hand force only. Do not 

over tighten.

8. 

Connect free end of Water Hose 

to the outlet side of the pump. Use a 

hose clamp to fix hose to pump. Attach 

other hose to inlet of pump with hose 

clamp. See Page 15 for more details. 

9. 

Fit seal to chrome flexible shower 

hose, then attach hexagonal end to 

the ‘water out’ connection (middle 

connection) on the water heater. Do 

not over tighten.

Seal (Clear rubber washer):   

Ensure a seal (supplied) is inserted into 

the connector at both ends of the 

flexible shower hose.     

6. 

Attach black inlet hose to unit via 

crimped swivel fitting. Ensure a seal is 

inserted into the fitting.

3. 

Locate the Gas Hose and Regulator. 

It requires a black rubber seal to be 

inserted into the end shown below. 

Seal (Black

Rubber Washer)

Seal (Black

Rubber Washer)

Seal (Clear 

Rubber Washer)

Seal (Black rubber washer): 

Seal (Black rubber washer): 

4. 

DO NOT USE TEFLON TAPE on the 

gas or water fittings. The unit has been 

designed to be assembled with the use 

of rubber washers.    

2. 

Insert two ‘D’ batteries into the 

‘battery box’ and close the battery box 

lid. Note: The orientation of the battery 

terminals.

On/Off

| Gas Hot Water Shower

|Gas Hot Water Shower

Page 9

Page 10

Содержание 78X04














Отзывы: