background image

Problem

Cause

Water is Not Hot Enough

Adjust the gas regulator and water 

regulator to meet your desired temper-

ature. To Increase temperature; turn the 

gas regulator control from minimum to 

maximum and turn the water regulator 

control from maximum to minimum. 

Also, switch burners from “Low” to 

“High”.
Check source water temperature. If the 

source water temperature is too cold 

then you may need to recirculate the 

water through the system back into 

the source reservoir then through the 

appliance again to meet your desired 

temperature.

Check if there is a blue flame in the 

‘viewing window’. If you see a yellow 

flame there may be debris in the unit. 

Turn unit off immediately. Try to clear 

debris with compressed air. If further 

assistance is required please call 1800 

654 767.
Check your Gas Cylinder to ensure it is 

not empty. If using a new cylinder; try to 

cycle the unit on and off by using the 

Shower Head switch several times to 

purge the air from the gas lines.

Water Pump not working

Make sure the power source for the 

pump is adequate enough and has 

enough charge to operate the pump
Ensure all connections are securely 

joined and the switch is in the ON 

position
Pressure switch may be broken. 
Pump motor may have failed. 

Troubleshooting 

(continued)

Technical Assistance and Spare Parts

The Bushranger Gas Hot Water Shower has been inspected, tested and set by expert personnel prior to 

leaving the factory to guarantee quality.

We always recommend contacting the place of purchase, specifying the model, serial number and type 

of problem you are having with the unit. If unavailable contact: 

Kingsley Enterprises Pty Ltd

PO Box 6007, Minto BC 2566

Phone:    

Fax:  

1800 654 767

1800 655 196

International:

Email:

+612 8700 0400

[email protected]

Kingsley Products - Warranty Policy

Term

Meaning

Product 

information

information about the Kingsley product which may be contained in any of the documentation provided 

with the Kingsley product, including safety instructions, installation instructions, operating instructions, owner’s 

manual, service manual, labels and packaging

Purchase date

the date you purchased the Kingsley product from a Kingsley outlet, as specified in the purchase receipt

Kingsley outlet

an outlet authorised by Kingsley to sell Kingsley products

Kingsley products

products or components which Kingsley manufacturers or sells through Kingsley outlets

Warranty period

commences on and from the purchase date and ends as follows:

Portable Gas Hot Water Shower - 5 years

We/Us

Kingsley Enterprises Pty Ltd (ABN 23 001 592 749)

E:  [email protected]

A:  6A Brooks Road, Ingleburn NSW 2565

P:  1800 654 767

W:  www.kingsleyenterprises.com.au

You

the purchaser of the Kingsley product from a Kingsley outlet

1. 

Our Warranty

We warrant to you that the Kingsley product is free from defects in workmanship and materials for the 

warranty period.

2. 

Fitting and use

Please ensure you:

a. fit the Kingsley product in accordance with the product information and all relevant vehicle safety and  

compliance laws

b. use the Kingsley product for the purpose for which it was originally designed and in accordance with    

the product information and all relevant vehicle safety and compliance laws

3. 

Exclusions

Our warranty doesn’t cover:

a. normal wear and tear

b. fitting the Kingsley product other than in accordance with the product information and any relevant  

vehicle safety and compliance laws, including incorrect fitting

c. using the Kingsley product other than for the purpose for which it was originally designed or other  

 

than in accordance with the product information and any relevant vehicle safety and compliance  

 

laws, including unusual, improper or negligent use or misuse or overloading

d. misuse or neglect of the Kingsley product, including improper repair or maintenance or failing to repair or 

maintain

e. alteration, abuse, acts of nature, terrorism, vandalism, collision, road hazards or adverse conditions

4. 

Making a claim

Please immediately contact us as soon as you become aware of a possible defect in the Kingsley product.  

We’ll arrange for you to either attend a Kingsley outlet (at your cost) for a Kingsley representative to inspect 

the Kingsley product (as fitted to your vehicle) or for you to return the Kingsley product to us.  We’ll also 

request you to provide the purchase receipt and complete a warranty claim form.  In order to ensure our 

warranty is not voided, please keep the purchase receipt as proof of purchase and don’t remove the fitted 

Kingsley product from your vehicle before contacting us. Note: Non-transferable warranty. The original 

purchaser can only claim warranty.  If your claim’s in order, we’ll notify you and (at our sole discretion) either 

repair or replace the defective workmanship or materials (at our cost) or refund to you the purchase price you 

paid for the defective Kingsley product.  If further information or investigation is required or if the claim does 

not meet the requirements under our warranty, we’ll let you know.

5. 

Australian Consumer Law

The Kingsley product comes with guarantees that can’t be excluded under the Australian Customer 

Law.  You’re entitled to a replacement or refund if there’s a major failure and compensation for any other 

reasonably foreseeable loss or damage.  You’re also entitled to have the Kingsley product repaired or 

replaced if it fails to be of acceptable quality and the failure doesn’t amount to a major failure.

6. 

Other consumer rights

The benefits to you under our warranty are in addition to any other rights and remedies you are entitled to 

under relevant consumer laws.  Our warranty replaces any other warranty given by Kingsley or it’s supplier in 

respect of the Kingsley product.

7. 

Terms

The following terms have the following meanings:

| Gas Hot Water Shower

|Gas Hot Water Shower

Page 19

Page 20

Содержание 78X04














Отзывы: