CLEANING AND STORAGE
23
FAULT
If fault persists, consult your authorised Service Agent.
POSSIBLE CAUSE
REMEDY
Engine does not start,
runs erratically or
experiencing power
loss.
Engine skips at high speed.
Engine idles Poorly.
Excessive vibration and / or
noise.
Oil leaks from muffler or air
cleaner.
Throttle not in choke / start
position.
Spark plug gap too small.
Blocked engine cooling fins
and air passages.
Cutting assembly is loose.
Engine oil sump over filled.
Mower tipped or handled
incorrectly.
Cutting assembly is
unbalanced.
Air cleaner element is dirty.
Fuel tank empty or fuel shut
off valve closed.
Air cleaner element is dirty.
Spark plug loose.
Spark plug cable
disconnected.
Defective spark plug.
Spark plug gap incorrect
Vent hole in the filler cap is
blocked
Dirt, water or stale fuel in the
tank
Carburettor is flooded with
fuel.
Move throttle to choke / start
position.
Refer to engine manual.
Remove debris from around
engine.
Refer to Blade Care / Changing
Blades.
Check oil level and drain excessive
oil.
Check oil level, air cleaner
and spark plug and correct as
necessary.
Refer to Blade Care / Changing
Blades.
Service or replace air cleaner.
Fill tank with recommended fuel
grade and open fuel shut-off valve.
Service or replace air cleaner.
Tighten spark plug.
Refit cable to spark plug.
Replace damaged spark plug.
Replace damaged spark plug.
Refer to Engine Manual.
Clean or replace filler cap.
Drain and clean fuel tank. Refill
with clean fresh fuel before
starting.
Move throttle to ‘stop’ position,
pull the starter cord 5 - 6 times,
move throttle to ‘run’ and start
engine.
Содержание 500SF
Страница 25: ...NOTES 25 ...
Страница 26: ...NOTES 26 ...
Страница 27: ...NOTES 27 ...
Страница 28: ...www poweruplawncare com au Copyright Roy Gripske Sons Pty Ltd 2013 ...