manualshive.com logo in svg

Bushranger 500SF, Инструкция по сборке и эксплуатации

Поделиться
Скачать
Bushranger 500SF Скачать руководство пользователя страница 13

OPERATING THE LAWNMOWER

13

Cutting height adjustment:

The single lever height adjustment makes for easy change 
from one height setting to another. There are ten height 
of cut settings available (from 10 mm to 65 mm) and the 
most suitable height should be selected that best suits the 
grass and weather conditions. To adjust the height of cut 
setting, follow the steps below.

 

• 

Grip the height adjust lever by the black  

  knob.
 

• 

Apply an outward force to the lever to    

 

 

disengage it from the quadrant rack setting.

 

• 

Holding the lever out, move the lever up 

 

 

or down the quadrant rack to the desired  

 

 

height of cut.

 

• 

Engage the lever into the quadrant rack by  

 

 

releasing the outward force.

Note that when using a mulching lawnmower, using 
the higher height settings will give the best mulching 
performance.

There are two holes in the axle bell cranks on the left hand 
side of the mower.  The correct setting for the connecting 
rod link is to have the rear of the link in the top hole and 
the front of the link in the lower hole.  

Содержание 500SF





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды